How to Install a Gas Range

Installing a gas range is not at all a hard task. However, you have to adhere to all the set safety regulations if you choose to go the path of DIY as opposed to hiring a technician. You should be careful to tighten your gas connections well to avoid leaks that may result in unwanted fires. This article takes you through the steps of installing a gas range safely. However, it is important to note that you will need intermediate skill levels to go through the procedure successfully.

What You Will Need to Install a Gas Range

To install your gas range properly, you will require the following tools:

  • Tape measure
  • Electrical ground tester
  • Soapy water
  • A gas line that is already in place
  • Quality gas hose
  • Adjustable wrenches
  • An electrical outlet of 110 volts

Step 1: Area Preparation

Before beginning the installation process, you will need enough space for your connections. From your preferred plumber, get a quality gas line and an outlet. It is important to note that your plumber has to be licensed or else you risk purchasing counterfeits.

Still, in the preparation stage, you will need an electrical tester to help you to determine whether the ground you are about to use is suitable for the job. If your ground is suitable, your tester will light upon contact with the electrical outlet.

The final step of preparation involves removal of all the physical objects that may hinder the perfect placement of your gas range. Most brands of gas ranges come with a wall connection so you have to prepare for this aspect as well. Tighten all the valves well to ensure that no leaks that may cause unwanted fires are available.

Step 2: Installing the Gas Range

When installing your range, move it carefully to avoid scratching. The distance between the wall connection and your gas range should be considered to ensure your gas line isn’t overstretched. Use the wrenches to tighten the connections securely to avoid leaks. Place some soapy water at the end where range connects to the valve and turn on the gas valve. Any show of bubbles will signify that the connections are leaking so you will need to go back to tightening the connections further.

Step 3: Finishing

This is the easiest step but by far the most crucial one. After you are certain that your connections and valves have no leaks, ensure that every other part of your gas range is in place then turn on the power. The light produced should burn naturally and the valves should adjust normally. Any other result will mean that the hose has probably been crashed or there is excessive pressure on one of the pipes connecting to your range.

Conclusion

Installing a gas range is one of the easiest tasks that you can undertake in your home. You can save the money that you could have used to pay a technician by following the simple steps that this article has provided. However, you should adhere to all the set safety regulations and have at least intermediate skills before trying to install a gas range.

Also read: How to Clean a Gas Range Top

Leave a Reply

Social media & sharing icons powered by UltimatelySocial